Vauxhall Zafira 2010 Owner's Manual Page 182

  • Download
  • Add to my manuals
  • Print
  • Page
    / 243
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 181
178 Self-help, Vehicle Care
4. Before positioning the jack 3, set it to the
necessary height by rotating the eye by
hand. Position the jack 3 at the front or
rear so that the jack claw spans the
vertical base and grips in the recess in
the vertical base. Make sure it is properly
positioned.
The jack b ase must be on the ground
directly below the jacking point in a
manner that prevents it from slipping.
Attach crank to eye of threaded rod and
turn crank to raise vehicle.
If this is not the case, carefully lower
the vehicle immediately and reposition
the jack.
5. Unscrew wheel bolts and wipe clean
with a cloth. Then apply a light coating
of grea se to the wheel bolts. Do not
grease the thread of the bolts. Do not
put the wheel bolts down in a location
where they may becom e soiled.
If the wheel bolts have retaining
washers 3, they must not be removed.
6. Change the wheel. Notes on spare
wheel – see p age 175. Notes on
tempora ry spare wheel – see page 176.
7. Screw in wheel bolts and tighten
slig htly, inserting the wheel bolt
wrench 3 as far as possible.
8. Lower vehicle.
9. Tighten wheel bolts crosswise, putting
on wheel bolt wrench 3 as far as
possible.
10.Before refitting the wheel cover clean
the w heel a round the retaining clips.
Valve symbol 3 on back of wheel cover
must point towards valve on wheel.
Align and refit wheel trim or wheel bolt
caps 3.
Alloy wheels 3: Align a nd refit wheel
bolt caps 3 .
11. Stow the removed wheel, tools and
warning triangle 3
see pages 174, 175.
12. Check the tyre pressure of the newly
fitted wheel. Adjust as necessary.
Page view 181
1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 242 243

Comments to this Manuals

No comments