Vauxhall Ampera Owner's Manual Page 106

  • Download
  • Add to my manuals
  • Print
  • Page
    / 195
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 105
Driving and operating 105
A welcome, ready, and goodbye
audio message will be heard in the
vehicle and animated on the
instrument cluster when opening the
driver's door upon entry, when the
vehicle is ready to be driven and when
the ignition is switched off. The
instrument cluster displays an active
fuel or battery gauge, along with an
audio start-up cue, when the vehicle
is ready to be driven. This could take
up to 15 seconds at extremely cold
temperatures. The engine will only
start if needed. If the vehicle did not
start, the instrument cluster will
display a screen with inactive fuel and
battery gauges.
Starting the vehicle with a low radio
remote control battery
If the vehicle will not start due to a low
radio remote control battery,
a message displays in the DIC.
However, the vehicle can still be
driven. Therefore proceed as follows:
1. Open the instrument panel
storage and remove the rubber
mat.
2. Extend the key blade and place
the blade into the slot.
3. With the vehicle in P or N, apply
the brake pedal and press m on
the instrument panel.
Replace the radio remote control
battery as soon as possible.
Battery replacement 3 20.
Restarting
If the vehicle must be restarted while
it is still moving, move the shift lever
to N and press m twice without
pressing the brake pedal. The
propulsion system will not restart in
any other position.
Computers determine when the
engine needs to run. The engine may
start, if required, when the propulsion
system is on. Some vehicle
conditions that force the engine to run
are:
Cold ambient temperatures.
The bonnet is open or not
completely latched.
The high voltage battery has a low
charge.
The engine is needed to maintain
the high voltage battery
temperature.
The engine needs to run for
maintenance 3 109.
A chime will sound if the driver's door
is opened while the ignition is
switched on. Always press m to
switch the ignition off before exiting.
Stopping
Power button 3 102.
Page view 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 194 195

Comments to this Manuals

No comments