Vauxhall Ampera Owner's Manual Page 159

  • Download
  • Add to my manuals
  • Print
  • Page
    / 195
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 158
158 Vehicle care
Please note that the tyre pressure
monitoring system is not a substitute
for proper tyre maintenance and it is
the driver's responsibility to maintain
correct tyre pressure, even if under‐
inflation has not reached the level to
trigger illumination of the tyre
pressure monitoring system low tyre
pressure telltale.
The tyre pressure monitoring system
malfunction indicator is combined
with the low tyre pressure telltale.
When the system detects
a malfunction, the telltale will flash for
approximately one minute and then
remain continuously illuminated. This
sequence will continue upon
subsequent vehicle start‐ups as long
as the malfunction exists.
When the malfunction indicator is
illuminated, the system may not be
able to detect or signal low tyre
pressure as intended. Tyre pressure
monitoring system malfunctions may
occur for a variety of reasons,
including the installation of
replacement or alternate tyres or
wheels on the vehicle that prevent the
tyre pressure monitoring system from
functioning properly. Always check
the tyre pressure monitoring system
malfunction telltale after replacing
one or more tyres or wheels on your
vehicle to ensure that the
replacement or alternate tyres and
wheels allow the tyre pressure
monitoring system to continue to
function properly.
Tyre pressure monitor operation
When a low tyre pressure condition is
detected, A illuminates.
If A comes on, stop as soon as
possible and inflate the tyres as
recommended in this manual.
Tyre pressures 3 185.
A message to check the pressure in
a specific tyre displays in the Driver
Information Centre (DIC). A and the
DIC warning message come on at
each drive cycle until the tyres are
inflated to the correct inflation
pressure. Using the DIC, tyre
pressure levels can be viewed.
Control indicator A 3 65.
DIC 3 67.
A may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
could be an early indicator that the air
pressure is getting low and needs to
be inflated to the proper pressure.
The tyre and loading information label
on the front left centre B-pillar
indicates the original equipment tyres
and the correct cold tyre inflation
pressures.
Additional to that: See tyre pressure
3 185.
The tyre pressure monitoring system
can warn about a low tyre pressure
condition but it does not replace
normal tyre maintenance.
The use of commercially available
liquid tyre repair kits can impair the
function of the system. Factory
approved repair kits can be used.
Adaptive threshold function
The tyre pressure monitoring system
automatically detects if the vehicle is
driven with a tyre pressure
appropriate for a load of up to
3 people or for a full load.
Page view 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 194 195

Comments to this Manuals

No comments