Vauxhall Ampera Owner's Manual Page 115

  • Download
  • Add to my manuals
  • Print
  • Page
    / 195
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 114
114 Driving and operating
Parking brake
Electrical parking brake
The electrical parking brake can
always be activated, even if the
ignition is off. To prevent draining of
the 12 volt battery, avoid repeated
cycles of the electrical parking brake
system when the ignition is off.
In case of insufficient electrical
power, the electrical parking brake
cannot be applied or released.
Before leaving the vehicle, check the
control indicator m to ensure the
parking brake is applied.
Electrical parking brake apply
The electrical parking brake can be
applied anytime the vehicle is
stopped. The electrical parking brake
is applied by momentarily lifting up on
the m switch. Once fully applied, the
control indicator m will be on.
While the brake is being applied, the
control indicator m will flash until full
apply is reached. If the light does not
come on, or remains flashing, seek
the assistance of a workshop.
Do not drive the vehicle if the control
indicator m is flashing.
If the electrical parking brake is
applied while the vehicle is in motion,
a chime will sound and a message
displays in the the Driver Information
Centre (DIC). The vehicle will
decelerate as long as the switch is
held in the up position.
Releasing the m switch during the
deceleration, will release the parking
brake. If the m switch is held in the up
position until the vehicle comes to
a stop, the electrical parking brake will
remain applied.
If the control indicator m flashes
continuously, the electrical parking
brake is only partially applied or
released or there is a problem with the
electrical parking brake. If so,
a message is displayed in the Driver
Information Centre (DIC). If m
flashes continuously, release the
electrical parking brake and attempt
to apply it again. If m continues to
flash, do not drive the vehicle. Seek
the assistance of a workshop.
If the electrical parking brake fault
indicator p is on, the electrical parking
brake has detected a system problem
and is operating with reduced
functionality. To apply the electrical
parking brake when p is on, lift up on
the m switch and hold it in the up
position.
Full application of the parking brake
by the electrical parking brake system
may take a longer period of time than
normal when p is on. Continue to hold
the m switch until the control indicator
m remains on. If the electrical parking
brake fault indicator p is on, seek the
assistance of a workshop.
Page view 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 194 195

Comments to this Manuals

No comments